E/S8.16.20.1 Eight-Channel Lighting Module - Smart Lighting System

Intelligent Lighting Control System

Intelligent lighting circuit control modules are installed in the lighting distribution boxes of public areas in various buildings. These modules are connected to the control modules of each floor's distribution boxes via communication buses. A communication gateway is set up in the distribution box on each floor and connected to the equipment network.

Lighting control panels are installed in the corridors of each floor to control the lighting circuits managed by the modules. Scene control can be achieved through programming.

Intelligent lighting management software is deployed on the building equipment management station PC at the security control room monitoring console. This enables unified management and control of all intelligent lighting modules via the equipment network.

For more product information or pricing, please call our company.

Quotation: ⒈⒊⒏→⒐⒈⒏⒊→⒋⒌⒏⒎ (Manager Wu) 

Please contact Manager Wu: 一三8 → 9 一八三→ 四五八七 (same VX)

We wholeheartedly provide project design optimization and configuration plan quotations!!!

Main Functions of Lighting Control Modules:

E/S4.16.20.1 Four-channel lighting module

E/S8.16.20.1 Eight-channel lighting module

E/S12.16.20.1  Twelve-channel lighting module

Manual operation switch

On/Off delay time function

Scene and preset control: 8-bit/1 position

Status value query response with logic functions such as "AND," "OR," "XOR," and gate functions

Forced operation and safety function threshold function

Relay switch position selection for staircase lighting function after bus voltage disconnection and recovery; warning and adaptive staircase lighting time

E/IPB2.6.1 Mobile Illuminance Sensor

Illuminance and motion detection function

Constant illuminance function

Illuminance and motion logic function

Sensitivity settings

Disable and enable functions

E/GAIPR1.1KNX IP RouterMain Functions:

Standard KNX IP router, supports 4 standard tunnel connections, supports custom additional physical addresses

Supports bidirectional group address filtering, supports device self-programming

Users can freely set message response methods, supports DHCP and static IP address allocation

E/LK2.1 Line Coupler Main Functions:

Standard KNX line coupler automatic filtering table

Can be used as a line coupler or a line repeater

Lighting System Product Selection:

OS/BP1036.1 3-gang 6-key smart panel

E/S4.16.20.1  Four-channel switch actuator

E/S8.16.20.1  Eight-channel switch actuator

E/S12.16.20.1  Twelve-channel switch actuator

E/IPB2.6.1 Mobile illuminance sensor

E/LK2.1 Line coupler

OS/PSO2640.1  Bus power supply

E/STC04.01  Time controller

E/GAIPR1.1  KNX IP router